A. Before production -Control of raw material before use -Data recording of raw material→products traceability B. During production -Control at each step of production -Validation of each step by quality controllers C. After production -Systematic flash test on each PV modules -Quality control with IEC compliance -Tests in our facility testing -Optional: Third party inspection before shipment if needing.
Less shading effect Better mechanical loading toleranceHigher output power Lower temperature coefficient
| Peak Power(PMP) | 100W | 160W | 200W | 260W | 320W |
| Tolerance | ± 3% | ||||
| Maximum power current(IMP) | 5.55A | 8.33A | 5.56A | 8.34A | 8.34A |
| Maximum power voltage(VMP) | 18V | 18V | 36V | 30V | 36V |
| Short-Circuit Current(ISC) | 5.89A | 8.83A | 5.89A | 8.83A | 8.83A |
| Open-Circuit Voltage(VOC) | 21.6V | 21.6V | 43.2V | 36V | 43.2V |
| Maximum System Voltage | 1000VDC | ||||
| F.F | 73% | ||||
| Module eff. | 20% | 20% | 20% | 20% | 20% |
| All technical data at standard test condition:AM=1.5, E=1000W/m², Tc=25℃ | |||||
| Type of battery | poly |
| Number of cells | 144（6×24） |
| Maximum power | 350W |
| Highest efficiency | 17.4% |
| Junction Box | IP68 |
| Maximum system voltage | 1000V/1500V DC（IEC） |
| Operating temperature | -40℃～+85℃ |
